<img alt="" src="https://www.sharp-perceptive-intelligence.com/805209.png" style="display:none;">
Asset_Validaide_Packaging-Simulation-LP-Hero_2026_Q4_V02
Packaging Simulation

Know which packaging holds on your lane before you ship

Calculated on your lane, tested on the real packaging and validated against real shipment data. Choose the right packaging before the first shipment, then balance cost and risk as the lane runs.

Your packaging was qualified on two profiles and one shipment

The industry standard is ISTA summer and winter profiles plus a PQ shipment. That’s static data and a single test run, and your lane runs 12 months a year through sun, handling, delays and long airport dwells.

The cost shows up later: excursions on lanes that looked safe, lane approvals that drag, or a lane that costs more than it needs.

Calculated. Tested. Validated.

Every packaging goes through the same steps before it reaches your lane.

Calculated

A digital twin models how each packaging behaves, leg by leg and month by month.

Tested

Every packaging runs the same standardized lab tests on the real packaging: 3 hot and 3 cold runs, 9+ sensors, 10-minute sampling. So you compare options like for like.

Validated

Calibrated against real shipment data and conservative by design: when in doubt, the model errs on the side of risk.

Simulated on your lane

Cold, typical and hot ambient for every step of the route: road, handling, flight and airport dwell.

How it works

From shortlist to score in four steps

Packaging Simulation is a tab on the lane page in Lane Risk & Planning.

  • Shortlist: Packaging that fits the lane's booked temperature range and qualifying duration, up to three at once.

  • Add lane climate: Cold, typical and hot ambient for every leg of the route.

  • Simulate: Each option runs through its digital twin, month by month.

  • Score: Pass or fail by month, reserve time on arrival and a Packaging Performance score from 0 to 5 stars.

Plan and optimize on the same lane

Packaging Simulation sits in the lane record, next to your lane risk assessment. Supply Chain, Packaging and Quality approve the lane from one place.

Before you ship

Choose and qualify

  • Shortlist that fits the lane
  • Which options hold, by month
  • Buffer each leaves on arrival
  • Approve with the result in the lane record

After the lane runs

Manage cost and risk

  • Real curves from each shipment
  • Buffer actually used
  • Lower-cost packaging where there is headroom
  • Upgrade where it runs close to the limit

See Packaging Simulation on a lane like yours

  • Compare up to three packaging options on one lane

  • See pass or fail for every month of the year

  • Check the buffer each option leaves on arrival

  • Approve the lane with the evidence next to your lane risk assessment

  • Revisit packaging cost and risk as shipment data comes in

Packaging Simulation questions, answered

Customer story

“As we enter new markets, we now have a simple, reliable way to assess risk.”

Read case study